Mini IPC series connectors and assemblies is factory-terminated, environmentally sealed and hardened connectors to reduce the cost and the time of drop cable deployment in optical access networks. The patchcord is specifically designed to significantly reduce required drop cable installation and compatible to active device. The patchcord provide a robust and sealed connection solution for FTTA and FTTH connectivity. we have DLC,SC,MPO and fast connector Type
Application:
FTTH Network
outdoor harsh environment newwork area
Features:
Cost saving solution for both indoor and outdoor termination
IP67 waterproof and dust protection
wide range of operational temperature at outside plant -40 to 85°C
different cable diameter can be be available and pre-terminated
no need any special tools on side installation
Patchcord Specifications
| Parameters | Specifications |
| Connector Type | FTTA & FTTH water-proof connector |
| Fiber Type | SM or MM |
| Fiber Core | 1,2,4~24 |
| Insertion Loss (dB) | Depend on water-proof connector type |
| Material of Outer Jacket | LSZH, PE, PVC, PA, TPU or customized |
| Cable Length (m) | Customized |
| Operating Temperature (℃) | -40 ~ +85
|
Optical Characteristics
| Item | Parameter | Reference |
| Single mode | Multimode |
| Insertion Loss | Maximum≤0.3dB | Maximum≤0.3dB | IEC 61300-3-34 |
| Return Loss | ≥60dB (APC) ≥50dB (UPC) | ≥30dB (UPC) | IEC 61300-3-6 |
End-Face Geometry
| Item | UPC | APC |
| Radius of curvature (mm) | 7~25 | 5~12 |
| Fiber height (nm) | -100~100 | -100~100 |
| Apex offset (um) | 0~50 | 0~50 |
| APC angle (°) |
| 8±0.2 |
| Key error (°) |
| 0.2 max |
